Your device is controlled by an internal program called firmware. As a part of ongoing product maintenance, the firmware is upgraded and errors are corrected.
It is possible that a newer version (an ‘update’) of the firmware has been released since you purchased the device. In this case, you can easily update your device to the latest version.
Use SpeechControl (Philips Device Control Center) to upgrade the firmware of your device. You can download the latest version of the application here: https://www.dictation.philips.com/speechcontrol. Please follow the steps outlined below to upgrade your device.
Note
A firmware upgrade is only possible if the following preconditions are met:
-
The SpeechMike has at least 50% (approx. 12 hours) battery power left.
-
The SpeechMike is not in idle mode.
-
There is no recording or playback running.
To upgrade your device:
-
Connect the docking station to a power outlet and to the computer by using the supplied USB cables and the power supply unit. Then place the SpeechMike into the docking station.
Note Make sure to upgrade your device together with all the accessories you are commonly using, including the docking station (or for some devices the optional remote control). If you are using your device together with the optional Philips AirBridge, make sure to also upgrade any other hardware you are commonly using with your device (e.g. the docking station). -
Start Philips Device Control Center:
-
If the option to start the Philips Device Control Center automatically was selected during installation, open the program by clicking the
icon in the notification area of the Windows task bar.
-
To manually start the program, open the Windows start menu in Windows and select Philips Speech Control > Philips Device Control Center.
Note
Make sure that you're using the latest version of Philips Device Control Center.
-
-
On the Device tab, click on Firmware upgrade.
-
Click on the desired upgrade version from the Available firmware versions list.
If the Available firmware versions list is empty, you can also manually check our website for firmware upgrades.
Download the firmware update for your SpeechMike model from www.philips.com/dictation.
Click the Import button and select the folder with the firmware files to be imported.
-
Click the Upgrade button.
-
Choose Yes, upgrade the device to install the new firmware.
-
The firmware upgrade takes about 30 seconds.
-
When the firmware upgrade is finished, the SpeechMike and the docking station are shortly disconnected and the wireless connection LED on both devices starts flashing red
-
The pairing process starts automatically. When the connection is re-established, the wireless connection LED on the SpeechMike and the docking station glow green.
-
Caution
Do not disconnect the dictation microphone from the computer during firmware upgrade. This might damage your product.
Comments
0 comments
Please sign in to leave a comment.